SHOWER UPGRADE 101 - TOP TIPS FOR NEW UNIT INSTALLATION

Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Book An Estimate Now



On this page below you can locate a good deal of good quality insight around How to Build a Shower Enclosure for Your DIY Bathroom.


How to Install a Shower Enclosure
A successful shower setup needs cautious preparation and a lot of work. For the most part, you will need to do 3 kinds of jobs: mounting wall surfaces, mounting the plumbing, and also finishing wall surfaces.

Prep work


To start with, you have to select the kind of shower that you want to mount. It is important to determine whether the selected shower can managing particular systems and also can manage a safe level of water through the boiler. Many shower systems nowadays are created to be adaptable to various water stress (such as saved warm water and also cool keys).
It is additionally important to take into account the water pressure and the planning of the piping and drainage for the shower

Different Sorts Of Shower Units


  • Push-on Mixer: The tube and also spray parts of the push-on mixer shower device can be linked to the bath tap according to your requirement, and the water temperature can be adjusted via the taps. Push-on mixers are cheap and also exceptionally straightforward to mount. Nevertheless, although the hose pipe connection is simple, it is easily dislodged. Furthermore, it is troublesome to adjust the temperature level.

  • Bath/Shower Mixer: The pipe as well as spray of this type of shower are combined with a bath mixer faucet, and also the temperature can be adjusted through the bath faucets. It is a really cheap alternative and also no added plumbing is entailed. Nevertheless, the bath/shower mixers likewise experience troublesome temperature control choices.

  • Manual Mixer: The hose and spray of a manual mixer shower device belong of the wall surface system as well as the hot and cold water supplies are attached to a solitary valve The temperature and stress of the water are regulated via either one or a range of knobs (in more pricey showers). Although temperature control is much easier in manual mixer kinds, they are more pricey than the formerly pointed out mixers. They likewise require added plumbing of cold and hot supply of water pipes.

  • Thermostatic Mixer: The hose and also spray of this shower kind are a part of the wall device as well as the hot and cold water products are attached to a single valve below too. It is full with an integrated stabiliser to self-adjust the water temperature as well as to prevent it from coming to be as well hot. Among the greatest advantages of a thermostatic mixer shower kind consists of convenient temperature control. However, it is one of the most expensive of the various mixer choices.

  • Power Shower: A power shower is a single device including an effective electrical pump that is capable of modifying both the water stress as well as temperature. This kind of shower can be fitted if there is water system from a cold water cistern as well as a hot water cyndrical tube. A power shower makes the adjustment of both stress and temperature level simple. On the other hand, it disagrees for water heated directly by the shower or where the water is provided by a combination boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it warms the water electrically. It is important to keep in mind that for this shower type to be set up, the keys stress needs to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The system permits the temperature and also pressure to be changed via a knob. Versions with temperature stabilisers are much better as they remain unaffected by various other taps somewhere else in operation within the household. A significant downside of electrical showers is that the control handle only allows for the alternative of heats at less pressure, or lower temperature levels at a better pressure. This is problematic in the winter season when the spray is typically weak and also the keys water is cooler. However, this problem is dealt with in some designs which are readily available with a winter/summer setup.


  • Method


    Depending on the kind of shower you want to mount, the shower head have to either be suited order to avoid its contact with the water in the bath below or the base tray, or it should have a check valve.
    Before beginning, it is a good idea to note the placements of the shower head and also control, and also to intend the pipe-work involved. Additionally, the drainage system to remove the waste water will need to be planned. Both positions of the cable television path and the shower button will also need to be considered if an instant or electric shower unit is being installed.
    Use the instruction overview given with the shower device to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is essential to cut off the water. In order to secure the pipes, they should be offered a water-proof covering and likewise fitted with isolating valves. The pipes can after that be hidden into the wall and also glued over to neaten the overall appearance.
    Fit the base tray, shower head, as well as fittings.
    Attach the primary shower control to the pipes that will certainly be supplying the water (This may call for a female screw string adapter).
    Reconnect the water as well as test the pipelines for any kind of leakages, as some may require tightening.
    If you are mounting an electrical shower, bear in mind to switch off the power supply before making any kind of electrical links. Once these links have actually been made (there ought to be advice within the user's manual), the power supply can be switched back on.

    Readjusting Water Stress to Match Your Shower


    The cold water reservoir can be lifted to a greater elevation (sometimes as little as 150mm (6inches)) by installation a solid wooden assistance underneath it - perhaps made up of struts and blockboards. If you choose this alternative, the main and also circulation pipes will additionally need to be increased to meet the brand-new height of the storage tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it should be attached into the power supply in order to operate.

    Piping and also Drain


    It is best to use 15mm size supply pipelines, as well as make the runs to the shower as short and also straight as possible so as to preserve optimal pressure and reduce heat loss. In addition, by reducing the use of arm joints for pipe edges, you can decrease the resistance in the circulation of the supply of water. You can achieve this by flexing the pipes rather.

    Many Usual Mistakes


  • Breaking or ignoring regional code constraints.

  • Using pipelines that are too little.

  • Attaching copper to galvanized without making use of a brass or dielectric fitting in between the two.

  • Not making use of tape or pipe substance at threaded joints.

  • Uneven your fixtures when mounting them.

  • Not installing an air space filling for fixtures.

  • Reducing supply stub outs also short to set up the shutoff valves onto after the ended up wall remains in place.

  • Not effectively aligning tubes into fittings or quit valves. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will certainly cause a leakage.).

  • When turning the water back on in your house, always run the outdoors hose pipe shutoff or flush your commodes to bleed dust and also air from the lines. This debris can create problems in your sink faucets and also other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a Direct-to-Stud Shower Enclosure

    Hopefully you liked our section on How to Build a Shower Enclosure for Your DIY Bathroom. Thanks for spending some time to read our piece. Are you aware of anybody else who is inquisitive about the subject? Please feel free to share it. Thanks for going through it.




    Book Your Appointment


    Report this page